Place: Jubilee Campus, University of Notthingham, UK

Dates: June 21st – 22nd, 2022

Course fees:

Number of seats: 10

To ensure a good quality of our course the number of seats will be limited to 10. Don’t wait too much to register!

Registration deadline: June 7th, 2022


⇒ Register Now


This training will provide to JMAG users an update on the last new features released in the software as well as two different courses about the two following topics :
– Scripting and Automation in JMAG for Electric Machine Design
– Electric motor simulation accounting for motor drive control circuit
The training will be a mix of theory, demonstrations, and exercises. Participants can also use its own model to follow the exercises.



This course is intended for existing JMAG users.

Licensing & Computers

Computers and JMAG licenses will be provided for the training.


The training will be a mix of theory, demonstrations and exercises.






09:30 – 12:30 AM: (Session 1)

➤ Introduction & Presentation of JMAG:

➤ JMAG Scripting & Automation for Electric Machine Design: (1/2)

12:30 – 14:00 PM: Lunch

14:00 – 17:00 PM: (Session 2)

➤ JMAG Scripting & Automation for Electric Machine Design: (2/2)

09:30 – 12:30 AM: (Session 3) I

➤ Motor Drive Control Circuit Modelling using JMAG: (1/2)

12:30 – 14:00 PM: Lunch

14:00 – 17:00 PM: (Session 4)

➤ Motor Drive Control Circuit Modelling using JMAG: (2/2)

➤ Conclusion & Open Topics:




Didier ZEFACK has more than 7 years of experiences as JMAG Simulation & Support Engineer at POWERSYS Solutions.
He supported many companies and universities on different simulation projects. He received two Professional master’s degrees, first, in Computational Engineering for FEA simulations of phenomena governed by the fluid & solid mechanics.
And secondly in Mechatronic for synergistic integration of mechanical engineering, electronics and intelligent computer control in design and manufacture of products and processes.
In addition to JMAG, he works also on Multiphysics CFD tools to provide a complete solution for electric motor design and optimization.


Building The Exchange, room B4, first floor

Jubilee Campus,

University of Notthingham,

Wollaton Rd, Lenton,

Nottingham NG8 1BB, Royaume-Uni











POWERSYS Software & Services

Mr. Didier ZEFACK, JMAG Engineer

Phone: +33 (0)4 42 61 76 14 | Email:

Mr. Corentin JOUVET, Sales Manager

Phone: +33 (0)6 48 66 69 10 | Email:


Nottingham Research Fellowship, Propulsion Futures Beacon
Power Electronics, Machines and Control Research Group (PEMC)

Dr. Tianjie Zou
m: +44 (0) 7529188142 | w:


⇒ Register Now


General conditions for training:

Please register as early as possible if you plan to attend the training. As soon as the minimum of participants is reached, POWERSYS will confirm the course. The registration to the course includes the lunches and coffee breaks. Participants will have to pay 100% in advance before the course.

Cancellation can be made according to POWERSYS’ General Conditions for courses: In case you cannot attend the course after having registred, please contact us as soon as possible at


Please note that POWERSYS will not reimburse any travel and/or accommodation expenditure in case of cancellation of the course. We recommend you to make your travel arrangements once the course is confirmed. For French participants: POWERSYS est enregistré en tant que prestataire de formation (auprès du Préfet de la Région Provence-Alpes-Côte d’Azur sous le numéro 93 13 13256 13). Une convention de formation peut être établie sur demande avant la date de formation.

Contact for any additional information: Please feel free to contact us for any further information



Multiple choices possible